- Timken World
- Contact
- Where to buy
-
- English
- 简体中文 (Chinese (Simplified))
- Français (French)
- Deutsch (German)
- Italiano (Italian)
- 日本語 (Japanese)
- 한국어 (Korean)
- Polski (Polish)
- Português (Portuguese (Brazil))
- Română (Romanian)
- Русский (Russian)
- Español (Spanish)
- Türkçe (Turkish)
- Engineering Tools
Menu
![Part Number H961649 - H961610, Tapered Roller Bearings - TS (Tapered Single) Imperial On The Timken Company (1) Part Number H961649 - H961610, Tapered Roller Bearings - TS (Tapered Single) Imperial On The Timken Company (1)](https://i0.wp.com/cad.timken.com/ImgCustom/1019/filler-large.jpg)
Batch CAD Cart (0) ▾
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series | N/A H961600 |
Cone Part Number | N/A H961649 |
Cup Part Number | N/A H961610 |
Design Unit | N/A Inch |
Cage Material | N/A Pin-Type |
Related Assembly Number(s) | N/A H961649-90014 H961649-90023 H961649-902A3 |
Dimensions
d - Bore | N/A 12.5000 in317.500 mm |
D - Cup Outer Diameter | N/A 24.5000 in622.300 mm |
B - Cone Width | N/A 5.1875 in131.763 mm |
C - Cup Width | N/A 3.25 in82.55 mm |
T - Bearing Width | N/A 5.8125 in147.638 mm |
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius1 | N/A 0.560 in14.200 mm |
r - Cup Backface "To Clear" Radius2 | N/A 0.5 in12.70 mm |
da - Cone Frontface Backing Diameter | N/A 14.69 in373 mm |
db - Cone Backface Backing Diameter | N/A 16.14 in410 mm |
Da - Cup Frontface Backing Diameter | N/A 23.11 in581.70 mm |
Db - Cup Backface Backing Diameter | N/A 20.91 in531.11 mm |
Ab - Cage-Cone Frontface Clearance | N/A 0.84 in21.3 mm |
Aa - Cage-Cone Backface Clearance | N/A 1.01 in25.7 mm |
a - Effective Center Location3 | N/A 2.38 in60.5 mm |
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)4 | N/A 184000 lbf819000 N |
C1 - Dynamic Radial Rating (1 million revolutions)5 | N/A 710000 lbf3160000 N |
C0 - Static Radial Rating | N/A 927000 lbf4130000 N |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | N/A 295000 lbf1310000 N |
Factors
K - Factor7 | N/A 0.62 |
e - ISO Factor8 | N/A 0.94 |
Y - ISO Factor9 | N/A 0.64 |
G1 - Heat Generation Factor (Roller-Raceway) | N/A 2500 |
G2 - Heat Generation Factor (Rib-Roller End) | N/A 149 |
Cg - Geometry Factor10 | N/A 0.240 |
- 1 These maximum fillet radii will be cleared by the bearing corners.
- 2 These maximum fillet radii will be cleared by the bearing corners.
- 3 Negative value indicates effective center inside cone backface.
- 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
- 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
- 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
- 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.
This website or its third-party tools use cookies. If you want to know more or to change your cookie settings on your computer or device, please see our cookie policy. By closing this banner, or continuing to use this website, you consent to the use of cookies.
Cookie Policy
Accept Decline