<i>Prey</i> Collectibles, Upgrades & Items Guide | Power Plant (2024)

<i>Prey</i> Collectibles, Upgrades & Items Guide | Power Plant (1)

Complete your visit to the Power Plant in Prey [2017] and fill your inventory with transcribes, weapon upgrade kits, neuromods and much more with this list of locations.

The Power Plant is the central location for the “Reboot” main story quest. The area is massive, but you won’t find too many items — everything is spread out, hidden in corners, or locked in storage closets. Get all the keycodes with the locations, and get tips for finishing up your exploration experience in the lowest area of the Talos 1 Station.

There aren’t many more locations left to explore in Prey — scroll down to the bottom to find the rest of our collectible guides for every other zone.

[Work-in-Progress: Check back soon for new updates.]

Weapon Upgrade Kit: Inside the Security Station booth at the Power Plant bulkhead entrance.

Employee: Brenda Cabrera – Corpse in the hallway outside the Monitoring control room.

Employee + Transcribe: Lan Nguyen – The dead boy near the resistor panel, next to the sealed Engineering Offices door. Carries an audio log transcribe.

Neuromod x3: There are three neuromods floating just beyond the door to the Engineering Offices. Technically, these neuromods are located in the Talos 1 Exterior, accessible in the Power Plant breach.

Power Plant Monitoring

Email #1, #2: Two emails are on the workstation before crossing the electrically charged flooded control room.

Transcribe: One transcribe is on the desk near the first workstation.

Q-Beam Fabrication Plan: On the landing opposite the flooded section of the monitoring station, near the dead body.

Employee + Transcribe: Duncan Krassikoff – Corpse on the landing opposite the entrance to the Monitoring room. Carries a transcribe and a chipset.

Typhon Lure Fabrication Plan: The dead employee (Duncan Krassikoff) is also carrying this fabrication plan.

Neuromod x1: The last important item held by Duncan Krassikoff is a single neuromod.

Parts Storage Keycode: 1289 – Found on the transcribe carried by Duncan Krassikoff, the corpse on the opposite landing from the entrance into the Monitoring station.

Email #1, #2: There are two hard-to-reach emails in the sunken, flooded and electrified area on a locked terminal. Use Hack 2 to access the computer.

Coolant Chamber

Employee + Transcribe: Talia Brooks – Found in the burning wreck to the left of the sealed Coolant Chamber keycard door.

Coolant Chamber Keycard: Found on the corpse of Talia Brooks.

Q-Beam Cell Fabrication Plan: Also found on Talia Brooks’ body.

Neuromod x1: The last useful item On the body of Talia Brooks.

Employee: Matthew Connolly – Found on the right side of the room from the grav lift. Look near the locked Maintenance Access Only door.

Employee: Mikhaila Ilyushin – She’s still alive, and found sitting in the Reactor Operator office, opposite the airlock.

Disruptor Battery Fabrication Plan: On the desk in the Reactor Operator office.

Neuromod x3: Also located on the desk, near the battery fabrication plan.

Email #1, #2: Use Hack 1 to unlock the workstation in the Reactor Operator office.

Employee: Anthony Aquilante – Falls out of the Medbay after opening the automatic doors.

Anti-Rad Pharma Fabrication Plan: Inside the Medbay near the airlock.

Parts Storage

Weapon Upgrade Kit x2: Two weapon upgrade kits are in the back-left corner shelves of the Parts Storage room. Use the keycode from the corpse in the Power Plant Monitoring room.

GLOO Cannon Fabrication Plan: Found on the shelf near the reception window.

Wrench Fabrication Plan: On the back-right shelves of the Parts Storage room. Right next to a Neuromod.

Neuromod x1: On the back-right shelves, next to the Wrench Fabrication Plan.

Reactor

Employee: Nicholas Stillwater – Corpse found in the ruined lift.

Reactor Access Keycard: Found on the dead body of Nicholas Stillwater, in the ruined lift on Level B4. Can also be found on Guy Croal, above the Reactor Access door.

Neuromod x1: The last useful item on Nicholas Stillwater is a single neuromod.

Employee: Guy Croal – On the catwalk above the Reactor Access doorway covered in Cystoid Nests.

Weapon Upgrade Kit: On a shelf in the secure storage room. Use Mimic or Hack 3 to gain access to the kit and four turrets.

Reactor Room Keycode: Given after completing the first steps of the reactor reboot sequence.

Transcribe: One transcribe is in the reactor itself, near the ruined divertor section.

More coming soon.

More Prey guides on The Escapist:

  • Prey: How To Get The Best Ending | ‘I And Thou’ Guide
  • Prey: How To Kill Every Human | ‘I And It’ Guide
  • Prey: How To Escape On Alex’s Escape Pod | Abandon Ship Ending
  • Prey: How To Get Rid Of Nightmares | ‘You Rang?’ Guide
  • Prey: All Weapons Locations Guide | Full Arsenal
  • Prey: Fabrication Plan Locations | Crafting Guide
  • Prey: Weapon Upgrade Kits Guide | All Locations
  • Prey: Neuromod Upgrades Guide | All Locations
  • Prey: How to Dupe Materials | Infinite Materials Guide
  • Prey: How To Craft Unlimited Neuromods | Infinite Glitch Guide
  • Prey: How To Get The Golden Gun | Unique Pistol Location
  • Prey: How to Solve Calvino’s Puzzle | ‘Coffee Break’ Guide
  • Prey: Die in 5 Minutes Or Less | “No Show” Easter Egg
  • Prey: All 6 Starbender Books | ‘Prism Master’ Guide
  • Prey: Complete Trophies List

The Escapist is supported by our audience. When you purchase through links on our site, we may earn a small affiliate commission.Learn more

<i>Prey</i> Collectibles, Upgrades & Items Guide | Power Plant (2024)

FAQs

Where do I put the fuse at the power plant? ›

After players gain access to the central puzzle building, they need to go around the machinery to the back to activate a final switch. Next, head up the staircases to the third floor and place the Electric Fuse item in Rust in the storage area in the right corner.

How do I get to Jean Faure Prey? ›

Locate Jean Faure

The door to the elevator shaft on the top level of walkways is locked, so you'll have to go down one level. Stand on the edge of the platform and look up — you'll see an maintenance access tunnel. That's your goal. Build yourself some GLOO platforms to climb up to the tunnel.

Where is the fuse placed? ›

The fuse wire is always connected in the live wire of the circuit because if the fuse is put in the neutral wire, then due to excessive flow of current when the fuse burns, current stops flowing in the circuit, but the appliance remains connected to the high potential point of the supply through the live wire.

Where should you put a fuse? ›

Recommended practice is to place the fuse near the positive terminal of the battery, so the whole circuit will be dead if the fuse blows. (Of course, if the positive terminal is considered Ground, place the fuse near the negative terminal.)

What to do with dahl prey? ›

Once inside, look for Jean Faure's terminal that looks out across the windows at Dahl. Look in the utilities for a tab that can initiate a decontamination sequence in this area - and it looks like Dahl doesn't have his helmet on. Doing this will cut off the air in his room, knocking him out without a fight.

How to get to power plant prey? ›

Hop back down to the ground level of the Water Treatment Facility, and head back toward the front door — the one that is unpowered. To the left of the door, there's a power control terminal that will allow you to reset the power breaker. This will (finally) unlock the door to the Power Plant.

How do you find chef prey? ›

Entering the Talos 1 Bridge, keep to the left to take a grav shaft down to the Escape Pod Bay, look for a lit up pod on the far left to find the imposter cook and former volunteer, severely wounded and strapped in.

Where do you put the fuse in a power supply? ›

Almost always put it closest to the (+) positive side of the power source, assuming a negative ground or common. The closer to the (+) terminal the better. Any uninsulated conductive parts between the fuse and the positive terminal are potentially the point of an unprotected short circuit to ground or common.

Where should the fuse be connected to? ›

A switch or a fuse in an electrical circuit is always connected to the live wire so that the socket or appliance is not live when switched off.

Where do you mount a fuse? ›

Always place the fuse as close to the source of power (battery, power jack, etc) as possible. Minimize excess cord between the power source and fuse.

Top Articles
Latest Posts
Article information

Author: Frankie Dare

Last Updated:

Views: 6422

Rating: 4.2 / 5 (53 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Frankie Dare

Birthday: 2000-01-27

Address: Suite 313 45115 Caridad Freeway, Port Barabaraville, MS 66713

Phone: +3769542039359

Job: Sales Manager

Hobby: Baton twirling, Stand-up comedy, Leather crafting, Rugby, tabletop games, Jigsaw puzzles, Air sports

Introduction: My name is Frankie Dare, I am a funny, beautiful, proud, fair, pleasant, cheerful, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.